<%@ Language=JavaScript %> Softwares for IrDA Devices


Click here for Japanese Documentation

Since 2/20/1995
Last
Update 4/2/2005


Infrared Remote Home Control software
RemoconCon
for Windows95

(Windows98/ME/2000/Xp is not supported)
(Only Win95 version of Japanese language is supported)


PASSWORD: REMOCCV20

"RemoconCon version2.X for Windows95" change into the freeware for some time.
It will be shareware again when version for Windows2000 will be completed.
The versions of other platforms ( ex. Palm OS or WindowsCE) are continuously being shareware.
"PASSWORD" of "RemoconCon version 2.X for Windows95" which unlock demo version is "REMOCCV20".
 

Actuation verification conditions :

"RemoconCon version2.X for Windows95" requires not virtual IrDA port (com4) but physical IrDA port (com1 or com2). This physical IrDA port was concealed from the OS and was defined Network Device on the Windows98/Me/2000/Xp.
But you can get back
physical IrDA port (com1 or com2), if you are power user.
If you are using the Windows98, it isn't impossible to work by edition of the driver inf file.
This method is written in the Japanese web documentations of this Softwares for IrDA Devices homepage.
Read Japanese web documentation, and you must not ask me about this method.
If you require annoying description about this method written in English by e-mail, I will abort the issue of the password.
IR powers of "SONY VAIO C1 Win98 model" and "CASIO FIVA Win98 model" are very strong.
They are good PCs for IR remote.
There are a lot of users of "IBM-PC110 upgraded to Win95" to work with "RemoconCon for Windows95" in Japan.
Edit the driver inf file with your own responsibility.
You are lucky, if this software works. 


RemoconCon for Windows95



with uninstaller package
(Help files and readme.txt was written in Japanese.)
RemoconCon.Ver2.8 Win95
(1,397kB) down load


RemoconCon is the first ever Windows95 software ( since 1995 ) that imitates an infrared remote control using the built-in infrared port (IrDA).

characteristic 1:

RemoconCon use the built-in infrared port.

characteristic 2:

By using Fujitsu (Japan) "IR-Commander" or "Crossam2+ ( Japan ) ", you get high reliability computerized home control environment. IR Commander is a multi-function adapter that supported IrDA / ASK / 24 feet 360 degree TV-Remote. Crossam2+ is the remotes which equipped RS-232.
I recommend above two devices.
Another selection, use Actisys ACT-IR200L. ACT-IR200L has TV-Remote function, It isn't known generally. RemoconCon use this TV-Remote function.

characteristic 3:

RemoconCon play back the procedure you setup.

characteristic 4:

Programming timer.

characteristic 5:

Task-tray function.


List of computers, those were possible to run.

desk top PC

IBM AT compatible machine + Fujitsu IR-Commander (recommend Win98OK)
IBM AT compatible machine + ALPS Ir-Multi station (Win98OK)
IBM AT compatible machine + HAL Corporation Crossam2+ (Leaning Remote controller) (recommend Win98OK)
IBM AT compatible machine + TEAC RC-20000 (Learning Remote controller) (Win98OK)
IBM AT compatible machine + IBM Infrared adaptor (Win98OK)
IBM AT compatible machine + Actisys ACTIR200L (recommend Win98OK)
TOSHIBA Brezza PV-3000 built in infrared port (IrDA)
ASUS TX97-XE + ASUS IRM-100 (Win98OK)

note PC

NEC mobioNX MB12C built in infrared port (IrDA)
IBM PalmTop PC110 built in infrared port (IrDA)
IBM ThinkPad 230CS built in infrared port (IrDA)
IBM ThinkPad 365 built in infrared port (IrDA)
IBM ThinkPad 501C built in infrared port (IrDA)
IBM ThinkPad 535 built in infrared port (IrDA)
IBM ThinkPad 560 built in infrared port (IrDA)
TOSHIBA Libretto20 built in infrared port (IrDA)
TOSHIBA Libretto30 built in infrared port (IrDA)
TOSHIBA Libretto50 built in infrared port (IrDA)
TOSHIBA Libretto60 built in infrared port (IrDA)
TOSHIBA Libretto70 built in infrared port (IrDA)
SONY VAIO NOTE PCG505X built in infrared port (IrDA)
SONY VAIO NOTE PCG505EX built in infrared port (IrDA)
SHARP Mebius PC-A435 built in infrared port (IrDA)
FUJITSU FMV-5100NC/S built in infrared port (IrDA)
FUJITSU FMV-5133NA/W built in infrared port (IrDA)
FUJITSU FMV-5120NV/W built in infrared port (IrDA)
Panasonic Let's note built in infrared port (IrDA)
Panasonic Let's note mini built in infrared port (IrDA)
DEC HiNoteUltraII CTS5133 built in infrared port (IrDA)
RIOS Chandra NOS NP-10N built in infrared port (IrDA)
GATEWAY2000 SOLO9100 built in infrared port (IrDA)



List of electrical appliances., those were possible to control.

TOSHIBA TV
TOSHIBA VCR
NEC TV
NEC VCR
HITACHI TV
HITACHI VCR
SANYO TV
SANYO VCR
YAMAHA CD stereo
SONY TV
SONY VCR
PANASONIC TV
PANASONIC VCR
SHARP TV
SHARP VCR
JVC TV
JVC VCR
MITSUBISHI TV
and others


Revision History:

1998/5/30
Version 2.8
Added support for ACTIR-200L/SHARP CE-IR5 (CS8130TV-Remote).

1998/3/1
Version
2.7
Added function that load RemoconCon into memory when Windows95 is initializing.

1997/7/1
Version 2.5
Added task-tray function.

1997/2/9
Version 2.0
Added support for Windows95.
Added programming timer.
Added function that avoid a conflict with the MS-IrDA2.0.
Added editable function.
Added learning function.

1995/2/20
Version 1.0
Released the first version of RemoconCon.
This version was for Hal Corporation (Japan) "Crossam2" and TEAC "RC-20000".
The "Crossam2" and the "RC-20000" were the remotes which equipped RS-232.

 


 

To Index